FM / git

/usr/share/doc/git

Name	Size	Mode	Actions
contrib/	-	0755	rm
howto/	-	0755	rm
RelNotes/	-	0755	rm
technical/	-	0755	rm
blame-options.txt	6001	0644	edit dl rm
cmds-ancillaryinterrogators.txt	1294	0644	edit dl rm
cmds-ancillarymanipulators.txt	746	0644	edit dl rm
cmds-developerinterfaces.txt	678	0644	edit dl rm
cmds-foreignscminterface.txt	399	0644	edit dl rm
cmds-guide.txt	833	0644	edit dl rm
cmds-mainporcelain.txt	3033	0644	edit dl rm
cmds-plumbinginterrogators.txt	1539	0644	edit dl rm
cmds-plumbingmanipulators.txt	1410	0644	edit dl rm
cmds-purehelpers.txt	1268	0644	edit dl rm
cmds-synchelpers.txt	449	0644	edit dl rm
cmds-synchingrepositories.txt	397	0644	edit dl rm
cmds-userinterfaces.txt	507	0644	edit dl rm
CODE_OF_CONDUCT.md	5989	0644	edit dl rm
config.txt	18001	0644	edit dl rm
date-formats.txt	1172	0644	edit dl rm
diff-format.txt	6573	0644	edit dl rm
diff-generate-patch.txt	7253	0644	edit dl rm
diff-options.txt	32436	0644	edit dl rm
docbook-xsl.css	4557	0644	edit dl rm
everyday.html	16996	0644	edit dl rm
fetch-options.txt	12281	0644	edit dl rm
fsck-msgids.txt	4197	0644	edit dl rm
git-add.html	40369	0644	edit dl rm
git-add.txt	16164	0644	edit dl rm
git-am.html	33161	0644	edit dl rm
git-am.txt	9317	0644	edit dl rm
git-annotate.html	28391	0644	edit dl rm
git-annotate.txt	771	0644	edit dl rm
git-apply.html	33407	0644	edit dl rm
git-apply.txt	10950	0644	edit dl rm
git-archive.html	29856	0644	edit dl rm
git-archive.txt	8491	0644	edit dl rm
git-bisect-lk2009.html	81243	0644	edit dl rm
git-bisect-lk2009.txt	49694	0644	edit dl rm
git-bisect.html	40572	0644	edit dl rm
git-bisect.txt	17905	0644	edit dl rm
git-blame.html	42501	0644	edit dl rm
git-blame.txt	8732	0644	edit dl rm
git-branch.html	48253	0644	edit dl rm
git-branch.txt	15748	0644	edit dl rm
git-bugreport.html	20509	0644	edit dl rm
git-bugreport.txt	2421	0644	edit dl rm
git-bundle.html	33269	0644	edit dl rm
git-bundle.txt	11703	0644	edit dl rm
git-cat-file.html	38661	0644	edit dl rm
git-cat-file.txt	13615	0644	edit dl rm
git-check-attr.html	22633	0644	edit dl rm
git-check-attr.txt	3390	0644	edit dl rm
git-check-ignore.html	23135	0644	edit dl rm
git-check-ignore.txt	4156	0644	edit dl rm
git-check-mailmap.html	18816	0644	edit dl rm
git-check-mailmap.txt	1108	0644	edit dl rm
git-check-ref-format.html	24040	0644	edit dl rm
git-check-ref-format.txt	5034	0644	edit dl rm
git-checkout-index.html	25362	0644	edit dl rm
git-checkout-index.txt	5669	0644	edit dl rm
git-checkout.html	52719	0644	edit dl rm
git-checkout.txt	22362	0644	edit dl rm
git-cherry-pick.html	31065	0644	edit dl rm
git-cherry-pick.txt	8764	0644	edit dl rm
git-cherry.html	22423	0644	edit dl rm
git-cherry.txt	3615	0644	edit dl rm
git-clean.html	23981	0644	edit dl rm
git-clean.txt	4523	0644	edit dl rm
git-clone.html	44328	0644	edit dl rm
git-clone.txt	14772	0644	edit dl rm
git-column.html	23317	0644	edit dl rm
git-column.txt	2201	0644	edit dl rm
git-commit-graph.html	26147	0644	edit dl rm
git-commit-graph.txt	5949	0644	edit dl rm
git-commit-tree.html	26683	0644	edit dl rm
git-commit-tree.txt	2710	0644	edit dl rm
git-commit.html	57154	0644	edit dl rm
git-commit.txt	21575	0644	edit dl rm
git-config.html	415540	0644	edit dl rm
git-config.txt	19755	0644	edit dl rm
git-contacts.html	20718	0644	edit dl rm
git-contacts.txt	2584	0644	edit dl rm
git-count-objects.html	18946	0644	edit dl rm
git-count-objects.txt	1350	0644	edit dl rm
git-credential-cache--daemon.html	18182	0644	edit dl rm
git-credential-cache--daemon.txt	891	0644	edit dl rm
git-credential-cache.html	20180	0644	edit dl rm
git-credential-cache.txt	2484	0644	edit dl rm
git-credential-store.html	22043	0644	edit dl rm
git-credential-store.txt	3637	0644	edit dl rm
git-credential.html	26676	0644	edit dl rm
git-credential.txt	7327	0644	edit dl rm
git-describe.html	28268	0644	edit dl rm
git-describe.txt	8319	0644	edit dl rm
git-diagnose.html	20157	0644	edit dl rm
git-diagnose.txt	2208	0644	edit dl rm
git-diff-files.html	79130	0644	edit dl rm
git-diff-files.txt	1225	0644	edit dl rm
git-diff-index.html	84351	0644	edit dl rm
git-diff-index.txt	4811	0644	edit dl rm
git-diff-tree.html	116052	0644	edit dl rm
git-diff-tree.txt	4184	0644	edit dl rm
git-diff.html	107093	0644	edit dl rm
git-diff.txt	8039	0644	edit dl rm
git-difftool.html	27048	0644	edit dl rm
git-difftool.txt	4624	0644	edit dl rm
git-fast-export.html	31650	0644	edit dl rm
git-fast-export.txt	11282	0644	edit dl rm
git-fast-import.html	103283	0644	edit dl rm
git-fast-import.txt	59963	0644	edit dl rm
git-fetch-pack.html	23255	0644	edit dl rm
git-fetch-pack.txt	4248	0644	edit dl rm
git-fetch.html	75456	0644	edit dl rm
git-fetch.txt	11812	0644	edit dl rm
git-filter-branch.html	54648	0644	edit dl rm
git-filter-branch.txt	31031	0644	edit dl rm
git-fmt-merge-msg.html	21435	0644	edit dl rm
git-fmt-merge-msg.txt	1931	0644	edit dl rm
git-for-each-ref.html	43438	0644	edit dl rm
git-for-each-ref.txt	17073	0644	edit dl rm
git-for-each-repo.html	19296	0644	edit dl rm
git-for-each-repo.txt	1543	0644	edit dl rm
git-format-patch.html	81842	0644	edit dl rm
git-format-patch.txt	28876	0644	edit dl rm
git-fsck-objects.html	17392	0644	edit dl rm
git-fsck-objects.txt	354	0644	edit dl rm
git-fsck.html	39162	0644	edit dl rm
git-fsck.txt	5882	0644	edit dl rm
git-fsmonitor--daemon.html	22875	0644	edit dl rm
git-fsmonitor--daemon.txt	3610	0644	edit dl rm
git-gc.html	36697	0644	edit dl rm
git-gc.txt	6292	0644	edit dl rm
git-get-tar-commit-id.html	17835	0644	edit dl rm
git-get-tar-commit-id.txt	753	0644	edit dl rm
git-grep.html	36030	0644	edit dl rm
git-grep.txt	10763	0644	edit dl rm
git-hash-object.html	19939	0644	edit dl rm
git-hash-object.txt	2142	0644	edit dl rm
git-help.html	28141	0644	edit dl rm
git-help.txt	7527	0644	edit dl rm
git-hook.html	18807	0644	edit dl rm
git-hook.txt	1028	0644	edit dl rm
git-http-backend.html	30974	0644	edit dl rm
git-http-backend.txt	11472	0644	edit dl rm
git-http-fetch.html	19679	0644	edit dl rm
git-http-fetch.txt	1775	0644	edit dl rm
git-http-push.html	21391	0644	edit dl rm
git-http-push.txt	2995	0644	edit dl rm
git-imap-send.html	25472	0644	edit dl rm
git-imap-send.txt	3567	0644	edit dl rm
git-index-pack.html	24735	0644	edit dl rm
git-index-pack.txt	5205	0644	edit dl rm
git-init-db.html	17460	0644	edit dl rm
git-init-db.txt	409	0644	edit dl rm
git-init.html	26604	0644	edit dl rm
git-init.txt	5869	0644	edit dl rm
git-interpret-trailers.html	42006	0644	edit dl rm
git-interpret-trailers.txt	18579	0644	edit dl rm
git-log.html	182485	0644	edit dl rm
git-log.txt	6864	0644	edit dl rm
git-ls-files.html	35053	0644	edit dl rm
git-ls-files.txt	11622	0644	edit dl rm
git-ls-remote.html	24349	0644	edit dl rm
git-ls-remote.txt	4841	0644	edit dl rm
git-ls-tree.html	25628	0644	edit dl rm
git-ls-tree.txt	5515	0644	edit dl rm
git-mailinfo.html	23402	0644	edit dl rm
git-mailinfo.txt	3866	0644	edit dl rm
git-mailsplit.html	19264	0644	edit dl rm
git-mailsplit.txt	1342	0644	edit dl rm
git-maintenance.html	46000	0644	edit dl rm
git-maintenance.txt	18901	0644	edit dl rm
git-merge-base.html	28380	0644	edit dl rm
git-merge-base.txt	7759	0644	edit dl rm
git-merge-file.html	22656	0644	edit dl rm
git-merge-file.txt	3718	0644	edit dl rm
git-merge-index.html	20450	0644	edit dl rm
git-merge-index.txt	2445	0644	edit dl rm
git-merge-one-file.html	17416	0644	edit dl rm
git-merge-one-file.txt	387	0644	edit dl rm
git-merge-tree.html	33496	0644	edit dl rm
git-merge-tree.txt	11923	0644	edit dl rm
git-merge.html	71005	0644	edit dl rm
git-merge.txt	15068	0644	edit dl rm
git-mergetool--lib.html	19127	0644	edit dl rm
git-mergetool--lib.txt	1467	0644	edit dl rm
git-mergetool.html	39795	0644	edit dl rm
git-mergetool.txt	4473	0644	edit dl rm
git-mktag.html	19819	0644	edit dl rm
git-mktag.txt	1782	0644	edit dl rm
git-mktree.html	18474	0644	edit dl rm
git-mktree.txt	1075	0644	edit dl rm
git-multi-pack-index.html	23595	0644	edit dl rm
git-multi-pack-index.txt	4632	0644	edit dl rm
git-mv.html	20092	0644	edit dl rm
git-mv.txt	2103	0644	edit dl rm
git-name-rev.html	21670	0644	edit dl rm
git-name-rev.txt	3352	0644	edit dl rm
git-notes.html	41046	0644	edit dl rm
git-notes.txt	13866	0644	edit dl rm
git-pack-objects.html	42391	0644	edit dl rm
git-pack-objects.txt	19297	0644	edit dl rm
git-pack-redundant.html	19799	0644	edit dl rm
git-pack-redundant.txt	1876	0644	edit dl rm
git-pack-refs.html	21120	0644	edit dl rm
git-pack-refs.txt	3136	0644	edit dl rm
git-patch-id.html	20354	0644	edit dl rm
git-patch-id.txt	2430	0644	edit dl rm
git-prune-packed.html	18539	0644	edit dl rm
git-prune-packed.txt	946	0644	edit dl rm
git-prune.html	20327	0644	edit dl rm
git-prune.txt	1919	0644	edit dl rm
git-pull.html	77070	0644	edit dl rm
git-pull.txt	8354	0644	edit dl rm
git-push.html	74993	0644	edit dl rm
git-push.txt	28061	0644	edit dl rm
git-quiltimport.html	19466	0644	edit dl rm
git-quiltimport.txt	1693	0644	edit dl rm
git-range-diff.html	31673	0644	edit dl rm
git-range-diff.txt	10337	0644	edit dl rm
git-read-tree.html	39078	0644	edit dl rm
git-read-tree.txt	16897	0644	edit dl rm
git-rebase.html	98945	0644	edit dl rm
git-rebase.txt	47228	0644	edit dl rm
git-receive-pack.html	30448	0644	edit dl rm
git-receive-pack.txt	9526	0644	edit dl rm
git-reflog.html	23514	0644	edit dl rm
git-reflog.txt	4575	0644	edit dl rm
git-remote-ext.html	23012	0644	edit dl rm
git-remote-ext.txt	3977	0644	edit dl rm
git-remote-fd.html	19501	0644	edit dl rm
git-remote-fd.txt	1628	0644	edit dl rm
git-remote-helpers.html	16974	0644	edit dl rm
git-remote.html	29903	0644	edit dl rm
git-remote.txt	8768	0644	edit dl rm
git-repack.html	32819	0644	edit dl rm
git-repack.txt	11020	0644	edit dl rm
git-replace.html	24858	0644	edit dl rm
git-replace.txt	5211	0644	edit dl rm
git-request-pull.html	20295	0644	edit dl rm
git-request-pull.txt	2035	0644	edit dl rm
git-rerere.html	27040	0644	edit dl rm
git-rerere.txt	7781	0644	edit dl rm
git-reset.html	44520	0644	edit dl rm
git-reset.txt	19125	0644	edit dl rm
git-restore.html	28166	0644	edit dl rm
git-restore.txt	7082	0644	edit dl rm
git-rev-list.html	118128	0644	edit dl rm
git-rev-list.txt	3220	0644	edit dl rm
git-rev-parse.html	64641	0644	edit dl rm
git-rev-parse.txt	15840	0644	edit dl rm
git-revert.html	26792	0644	edit dl rm
git-revert.txt	5421	0644	edit dl rm
git-rm.html	27584	0644	edit dl rm
git-rm.txt	7236	0644	edit dl rm
git-send-pack.html	24576	0644	edit dl rm
git-send-pack.txt	5160	0644	edit dl rm
git-sh-i18n--envsubst.html	18166	0644	edit dl rm
git-sh-i18n--envsubst.txt	928	0644	edit dl rm
git-sh-i18n.html	18595	0644	edit dl rm
git-sh-i18n.txt	1147	0644	edit dl rm
git-sh-setup.html	21277	0644	edit dl rm
git-sh-setup.txt	2976	0644	edit dl rm
git-shell.html	21414	0644	edit dl rm
git-shell.txt	2981	0644	edit dl rm
git-shortlog.html	64618	0644	edit dl rm
git-shortlog.txt	4409	0644	edit dl rm
git-show-branch.html	26813	0644	edit dl rm
git-show-branch.txt	6589	0644	edit dl rm
git-show-index.html	19521	0644	edit dl rm
git-show-index.txt	1473	0644	edit dl rm
git-show-ref.html	26075	0644	edit dl rm
git-show-ref.txt	6648	0644	edit dl rm
git-show.html	111644	0644	edit dl rm
git-show.txt	1929	0644	edit dl rm
git-sparse-checkout.html	43949	0644	edit dl rm
git-sparse-checkout.txt	21258	0644	edit dl rm
git-stage.html	17341	0644	edit dl rm
git-stage.txt	299	0644	edit dl rm
git-stash.html	38594	0644	edit dl rm
git-stash.txt	14999	0644	edit dl rm
git-status.html	45718	0644	edit dl rm
git-status.txt	20295	0644	edit dl rm
git-stripspace.html	20016	0644	edit dl rm
git-stripspace.txt	1946	0644	edit dl rm
git-submodule.html	45581	0644	edit dl rm
git-submodule.txt	20819	0644	edit dl rm
git-subtree.html	36823	0644	edit dl rm
git-subtree.txt	13687	0644	edit dl rm
git-switch.html	33314	0644	edit dl rm
git-switch.txt	8607	0644	edit dl rm
git-symbolic-ref.html	20452	0644	edit dl rm
git-symbolic-ref.txt	2327	0644	edit dl rm
git-tag.html	38958	0644	edit dl rm
git-tag.txt	13469	0644	edit dl rm
git-tools.html	17207	0644	edit dl rm
git-tools.txt	422	0644	edit dl rm
git-unpack-file.html	17645	0644	edit dl rm
git-unpack-file.txt	434	0644	edit dl rm
git-unpack-objects.html	18811	0644	edit dl rm
git-unpack-objects.txt	1220	0644	edit dl rm
git-update-index.html	49723	0644	edit dl rm
git-update-index.txt	23928	0644	edit dl rm
git-update-ref.html	25909	0644	edit dl rm
git-update-ref.txt	6298	0644	edit dl rm
git-update-server-info.html	18255	0644	edit dl rm
git-update-server-info.txt	801	0644	edit dl rm
git-upload-archive.html	19776	0644	edit dl rm
git-upload-archive.txt	2087	0644	edit dl rm
git-upload-pack.html	21671	0644	edit dl rm
git-upload-pack.txt	2998	0644	edit dl rm
git-var.html	21537	0644	edit dl rm
git-var.txt	3176	0644	edit dl rm
git-verify-commit.html	17948	0644	edit dl rm
git-verify-commit.txt	575	0644	edit dl rm
git-verify-pack.html	18953	0644	edit dl rm
git-verify-pack.txt	1111	0644	edit dl rm
git-verify-tag.html	17941	0644	edit dl rm
git-verify-tag.txt	562	0644	edit dl rm
git-version.html	17798	0644	edit dl rm
git-version.txt	532	0644	edit dl rm
git-web--browse.html	22405	0644	edit dl rm
git-web--browse.txt	3576	0644	edit dl rm
git-whatchanged.html	18572	0644	edit dl rm
git-whatchanged.txt	1098	0644	edit dl rm
git-worktree.html	46341	0644	edit dl rm
git-worktree.txt	20985	0644	edit dl rm
git-write-tree.html	18441	0644	edit dl rm
git-write-tree.txt	1026	0644	edit dl rm
git.html	107237	0644	edit dl rm
git.txt	43254	0644	edit dl rm
gitattributes.html	82845	0644	edit dl rm
gitattributes.txt	49511	0644	edit dl rm
gitcli.html	29584	0644	edit dl rm
gitcli.txt	9697	0644	edit dl rm
gitcore-tutorial.html	100139	0644	edit dl rm
gitcore-tutorial.txt	62240	0644	edit dl rm
gitcredentials.html	31980	0644	edit dl rm
gitcredentials.txt	11317	0644	edit dl rm
gitdiffcore.html	33745	0644	edit dl rm
gitdiffcore.txt	14082	0644	edit dl rm
giteveryday.html	38092	0644	edit dl rm
giteveryday.txt	14422	0644	edit dl rm
gitfaq.html	44081	0644	edit dl rm
gitfaq.txt	21069	0644	edit dl rm
gitformat-bundle.html	21446	0644	edit dl rm
gitformat-bundle.txt	3256	0644	edit dl rm
gitformat-chunk.html	24329	0644	edit dl rm
gitformat-chunk.txt	5560	0644	edit dl rm
gitformat-commit-graph.html	28630	0644	edit dl rm
gitformat-commit-graph.txt	7857	0644	edit dl rm
gitformat-index.html	40269	0644	edit dl rm
gitformat-index.txt	15180	0644	edit dl rm
gitformat-pack.html	49811	0644	edit dl rm
gitformat-pack.txt	23509	0644	edit dl rm
gitformat-signature.html	27362	0644	edit dl rm
gitformat-signature.txt	8093	0644	edit dl rm
gitglossary.html	64201	0644	edit dl rm
gitglossary.txt	358	0644	edit dl rm
githooks.html	56500	0644	edit dl rm
githooks.txt	29331	0644	edit dl rm
gitignore.html	28399	0644	edit dl rm
gitignore.txt	8918	0644	edit dl rm
gitmailmap.html	22819	0644	edit dl rm
gitmailmap.txt	3551	0644	edit dl rm
gitmodules.html	24057	0644	edit dl rm
gitmodules.txt	4800	0644	edit dl rm
gitnamespaces.html	22148	0644	edit dl rm
gitnamespaces.txt	2509	0644	edit dl rm
gitprotocol-capabilities.html	37425	0644	edit dl rm
gitprotocol-capabilities.txt	15311	0644	edit dl rm
gitprotocol-common.html	21565	0644	edit dl rm
gitprotocol-common.txt	3177	0644	edit dl rm
gitprotocol-http.html	43234	0644	edit dl rm
gitprotocol-http.txt	17994	0644	edit dl rm
gitprotocol-pack.html	53023	0644	edit dl rm
gitprotocol-pack.txt	27678	0644	edit dl rm
gitprotocol-v2.html	59690	0644	edit dl rm
gitprotocol-v2.txt	31434	0644	edit dl rm
gitremote-helpers.html	48215	0644	edit dl rm
gitremote-helpers.txt	21785	0644	edit dl rm
gitrepository-layout.html	39352	0644	edit dl rm
gitrepository-layout.txt	11622	0644	edit dl rm
gitrevisions.html	41621	0644	edit dl rm
gitrevisions.txt	823	0644	edit dl rm
gitsubmodules.html	31699	0644	edit dl rm
gitsubmodules.txt	10366	0644	edit dl rm
gittutorial-2.html	34547	0644	edit dl rm
gittutorial-2.txt	14750	0644	edit dl rm
gittutorial.html	46263	0644	edit dl rm
gittutorial.txt	22972	0644	edit dl rm
gitworkflows.html	39869	0644	edit dl rm
gitworkflows.txt	17414	0644	edit dl rm
glossary-content.txt	32609	0644	edit dl rm
howto-index.html	22991	0644	edit dl rm
howto-index.txt	4001	0644	edit dl rm
i18n.txt	2940	0644	edit dl rm
line-range-format.txt	1162	0644	edit dl rm
line-range-options.txt	761	0644	edit dl rm
merge-options.txt	7236	0644	edit dl rm
merge-strategies.txt	6610	0644	edit dl rm
mergetools-diff.txt	1507	0644	edit dl rm
mergetools-merge.txt	2586	0644	edit dl rm
MyFirstContribution.html	90572	0644	edit dl rm
MyFirstContribution.txt	54596	0644	edit dl rm
MyFirstObjectWalk.html	60554	0644	edit dl rm
MyFirstObjectWalk.txt	28979	0644	edit dl rm
object-format-disclaimer.txt	470	0644	edit dl rm
pretty-formats.txt	15669	0644	edit dl rm
pretty-options.txt	4201	0644	edit dl rm
pull-fetch-param.txt	5476	0644	edit dl rm
README.md	3652	0644	edit dl rm
ref-reachability-filters.txt	391	0644	edit dl rm
rerere-options.txt	414	0644	edit dl rm
rev-list-description.txt	2531	0644	edit dl rm
rev-list-options.txt	46906	0644	edit dl rm
ReviewingGuidelines.html	26831	0644	edit dl rm
ReviewingGuidelines.txt	8100	0644	edit dl rm
revisions.txt	17109	0644	edit dl rm
scalar.html	26055	0644	edit dl rm
scalar.txt	6056	0644	edit dl rm
sequencer.txt	472	0644	edit dl rm
signoff-option.txt	781	0644	edit dl rm
SubmittingPatches.html	55660	0644	edit dl rm
SubmittingPatches.txt	30147	0644	edit dl rm
ToolsForGit.html	19020	0644	edit dl rm
ToolsForGit.txt	1348	0644	edit dl rm
trace2-target-values.txt	529	0644	edit dl rm
transfer-data-leaks.txt	1712	0644	edit dl rm
urls-remotes.txt	2642	0644	edit dl rm
urls.txt	3634	0644	edit dl rm
user-manual.html	275731	0644	edit dl rm
user-manual.txt	173518	0644	edit dl rm

Edit: /usr/share/doc/git/git-commit.txt (21575B)

git-commit(1)
=============

NAME
----
git-commit - Record changes to the repository

SYNOPSIS
--------
[verse]
'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend]
	   [--dry-run] [(-c | -C | --squash) <commit> | --fixup [(amend|reword):]<commit>)]
	   [-F <file> | -m <msg>] [--reset-author] [--allow-empty]
	   [--allow-empty-message] [--no-verify] [-e] [--author=<author>]
	   [--date=<date>] [--cleanup=<mode>] [--[no-]status]
	   [-i | -o] [--pathspec-from-file=<file> [--pathspec-file-nul]]
	   [(--trailer <token>[(=|:)<value>])...] [-S[<keyid>]]
	   [--] [<pathspec>...]

DESCRIPTION
-----------
Create a new commit containing the current contents of the index and
the given log message describing the changes. The new commit is a
direct child of HEAD, usually the tip of the current branch, and the
branch is updated to point to it (unless no branch is associated with
the working tree, in which case HEAD is "detached" as described in
linkgit:git-checkout[1]).

The content to be committed can be specified in several ways:

1. by using linkgit:git-add[1] to incrementally "add" changes to the
   index before using the 'commit' command (Note: even modified files
   must be "added");

2. by using linkgit:git-rm[1] to remove files from the working tree
   and the index, again before using the 'commit' command;

3. by listing files as arguments to the 'commit' command
   (without --interactive or --patch switch), in which
   case the commit will ignore changes staged in the index, and instead
   record the current content of the listed files (which must already
   be known to Git);

4. by using the -a switch with the 'commit' command to automatically
   "add" changes from all known files (i.e. all files that are already
   listed in the index) and to automatically "rm" files in the index
   that have been removed from the working tree, and then perform the
   actual commit;

5. by using the --interactive or --patch switches with the 'commit' command
   to decide one by one which files or hunks should be part of the commit
   in addition to contents in the index,
   before finalizing the operation. See the ``Interactive Mode'' section of
   linkgit:git-add[1] to learn how to operate these modes.

The `--dry-run` option can be used to obtain a
summary of what is included by any of the above for the next
commit by giving the same set of parameters (options and paths).

If you make a commit and then find a mistake immediately after
that, you can recover from it with 'git reset'.

:git-commit: 1

OPTIONS
-------
-a::
--all::
	Tell the command to automatically stage files that have
	been modified and deleted, but new files you have not
	told Git about are not affected.

-p::
--patch::
	Use the interactive patch selection interface to choose
	which changes to commit. See linkgit:git-add[1] for
	details.

-C <commit>::
--reuse-message=<commit>::
	Take an existing commit object, and reuse the log message
	and the authorship information (including the timestamp)
	when creating the commit.

-c <commit>::
--reedit-message=<commit>::
	Like '-C', but with `-c` the editor is invoked, so that
	the user can further edit the commit message.

--fixup=[(amend|reword):]<commit>::
	Create a new commit which "fixes up" `<commit>` when applied with
	`git rebase --autosquash`. Plain `--fixup=<commit>` creates a
	"fixup!" commit which changes the content of `<commit>` but leaves
	its log message untouched. `--fixup=amend:<commit>` is similar but
	creates an "amend!" commit which also replaces the log message of
	`<commit>` with the log message of the "amend!" commit.
	`--fixup=reword:<commit>` creates an "amend!" commit which
	replaces the log message of `<commit>` with its own log message
	but makes no changes to the content of `<commit>`.
+
The commit created by plain `--fixup=<commit>` has a subject
composed of "fixup!" followed by the subject line from <commit>,
and is recognized specially by `git rebase --autosquash`. The `-m`
option may be used to supplement the log message of the created
commit, but the additional commentary will be thrown away once the
"fixup!" commit is squashed into `<commit>` by
`git rebase --autosquash`.
+
The commit created by `--fixup=amend:<commit>` is similar but its
subject is instead prefixed with "amend!". The log message of
<commit> is copied into the log message of the "amend!" commit and
opened in an editor so it can be refined. When `git rebase
--autosquash` squashes the "amend!" commit into `<commit>`, the
log message of `<commit>` is replaced by the refined log message
from the "amend!" commit. It is an error for the "amend!" commit's
log message to be empty unless `--allow-empty-message` is
specified.
+
`--fixup=reword:<commit>` is shorthand for `--fixup=amend:<commit>
--only`. It creates an "amend!" commit with only a log message
(ignoring any changes staged in the index). When squashed by `git
rebase --autosquash`, it replaces the log message of `<commit>`
without making any other changes.
+
Neither "fixup!" nor "amend!" commits change authorship of
`<commit>` when applied by `git rebase --autosquash`.
See linkgit:git-rebase[1] for details.

--squash=<commit>::
	Construct a commit message for use with `rebase --autosquash`.
	The commit message subject line is taken from the specified
	commit with a prefix of "squash! ".  Can be used with additional
	commit message options (`-m`/`-c`/`-C`/`-F`). See
	linkgit:git-rebase[1] for details.

--reset-author::
	When used with -C/-c/--amend options, or when committing after a
	conflicting cherry-pick, declare that the authorship of the
	resulting commit now belongs to the committer. This also renews
	the author timestamp.

--short::
	When doing a dry-run, give the output in the short-format. See
	linkgit:git-status[1] for details. Implies `--dry-run`.

--branch::
	Show the branch and tracking info even in short-format.

--porcelain::
	When doing a dry-run, give the output in a porcelain-ready
	format. See linkgit:git-status[1] for details. Implies
	`--dry-run`.

--long::
	When doing a dry-run, give the output in the long-format.
	Implies `--dry-run`.

-z::
--null::
	When showing `short` or `porcelain` status output, print the
	filename verbatim and terminate the entries with NUL, instead of LF.
	If no format is given, implies the `--porcelain` output format.
	Without the `-z` option, filenames with "unusual" characters are
	quoted as explained for the configuration variable `core.quotePath`
	(see linkgit:git-config[1]).

-F <file>::
--file=<file>::
	Take the commit message from the given file.  Use '-' to
	read the message from the standard input.

--author=<author>::
	Override the commit author. Specify an explicit author using the
	standard `A U Thor <author@example.com>` format. Otherwise <author>
	is assumed to be a pattern and is used to search for an existing
	commit by that author (i.e. rev-list --all -i --author=<author>);
	the commit author is then copied from the first such commit found.

--date=<date>::
	Override the author date used in the commit.

-m <msg>::
--message=<msg>::
	Use the given <msg> as the commit message.
	If multiple `-m` options are given, their values are
	concatenated as separate paragraphs.
+
The `-m` option is mutually exclusive with `-c`, `-C`, and `-F`.

-t <file>::
--template=<file>::
	When editing the commit message, start the editor with the
	contents in the given file.  The `commit.template` configuration
	variable is often used to give this option implicitly to the
	command.  This mechanism can be used by projects that want to
	guide participants with some hints on what to write in the message
	in what order.  If the user exits the editor without editing the
	message, the commit is aborted.  This has no effect when a message
	is given by other means, e.g. with the `-m` or `-F` options.

include::signoff-option.txt[]

--trailer <token>[(=|:)<value>]::
	Specify a (<token>, <value>) pair that should be applied as a
	trailer. (e.g. `git commit --trailer "Signed-off-by:C O Mitter \
	<committer@example.com>" --trailer "Helped-by:C O Mitter \
	<committer@example.com>"` will add the "Signed-off-by" trailer
	and the "Helped-by" trailer to the commit message.)
	The `trailer.*` configuration variables
	(linkgit:git-interpret-trailers[1]) can be used to define if
	a duplicated trailer is omitted, where in the run of trailers
	each trailer would appear, and other details.

-n::
--[no-]verify::
	By default, the pre-commit and commit-msg hooks are run.
	When any of `--no-verify` or `-n` is given, these are bypassed.
	See also linkgit:githooks[5].

--allow-empty::
	Usually recording a commit that has the exact same tree as its
	sole parent commit is a mistake, and the command prevents you
	from making such a commit.  This option bypasses the safety, and
	is primarily for use by foreign SCM interface scripts.

--allow-empty-message::
       Like --allow-empty this command is primarily for use by foreign
       SCM interface scripts. It allows you to create a commit with an
       empty commit message without using plumbing commands like
       linkgit:git-commit-tree[1].

--cleanup=<mode>::
	This option determines how the supplied commit message should be
	cleaned up before committing.  The '<mode>' can be `strip`,
	`whitespace`, `verbatim`, `scissors` or `default`.
+
--
strip::
	Strip leading and trailing empty lines, trailing whitespace,
	commentary and collapse consecutive empty lines.
whitespace::
	Same as `strip` except #commentary is not removed.
verbatim::
	Do not change the message at all.
scissors::
	Same as `whitespace` except that everything from (and including)
	the line found below is truncated, if the message is to be edited.
	"`#`" can be customized with core.commentChar.

# ------------------------ >8 ------------------------

default::
	Same as `strip` if the message is to be edited.
	Otherwise `whitespace`.
--
+
The default can be changed by the `commit.cleanup` configuration
variable (see linkgit:git-config[1]).

-e::
--edit::
	The message taken from file with `-F`, command line with
	`-m`, and from commit object with `-C` are usually used as
	the commit log message unmodified. This option lets you
	further edit the message taken from these sources.

--no-edit::
	Use the selected commit message without launching an editor.
	For example, `git commit --amend --no-edit` amends a commit
	without changing its commit message.

--amend::
	Replace the tip of the current branch by creating a new
	commit. The recorded tree is prepared as usual (including
	the effect of the `-i` and `-o` options and explicit
	pathspec), and the message from the original commit is used
	as the starting point, instead of an empty message, when no
	other message is specified from the command line via options
	such as `-m`, `-F`, `-c`, etc.  The new commit has the same
	parents and author as the current one (the `--reset-author`
	option can countermand this).
+
--
It is a rough equivalent for:
------
	$ git reset --soft HEAD^
	$ ... do something else to come up with the right tree ...
	$ git commit -c ORIG_HEAD

------
but can be used to amend a merge commit.
--
+
You should understand the implications of rewriting history if you
amend a commit that has already been published.  (See the "RECOVERING
FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)

--no-post-rewrite::
	Bypass the post-rewrite hook.

-i::
--include::
	Before making a commit out of staged contents so far,
	stage the contents of paths given on the command line
	as well.  This is usually not what you want unless you
	are concluding a conflicted merge.

-o::
--only::
	Make a commit by taking the updated working tree contents
	of the paths specified on the
	command line, disregarding any contents that have been
	staged for other paths. This is the default mode of operation of
	'git commit' if any paths are given on the command line,
	in which case this option can be omitted.
	If this option is specified together with `--amend`, then
	no paths need to be specified, which can be used to amend
	the last commit without committing changes that have
	already been staged. If used together with `--allow-empty`
	paths are also not required, and an empty commit will be created.

--pathspec-from-file=<file>::
	Pathspec is passed in `<file>` instead of commandline args. If
	`<file>` is exactly `-` then standard input is used. Pathspec
	elements are separated by LF or CR/LF. Pathspec elements can be
	quoted as explained for the configuration variable `core.quotePath`
	(see linkgit:git-config[1]). See also `--pathspec-file-nul` and
	global `--literal-pathspecs`.

--pathspec-file-nul::
	Only meaningful with `--pathspec-from-file`. Pathspec elements are
	separated with NUL character and all other characters are taken
	literally (including newlines and quotes).

-u[<mode>]::
--untracked-files[=<mode>]::
	Show untracked files.
+
--
The mode parameter is optional (defaults to 'all'), and is used to
specify the handling of untracked files; when -u is not used, the
default is 'normal', i.e. show untracked files and directories.

The possible options are:

- 'no'     - Show no untracked files
	- 'normal' - Shows untracked files and directories
	- 'all'    - Also shows individual files in untracked directories.

The default can be changed using the status.showUntrackedFiles
configuration variable documented in linkgit:git-config[1].
--

-v::
--verbose::
	Show unified diff between the HEAD commit and what
	would be committed at the bottom of the commit message
	template to help the user describe the commit by reminding
	what changes the commit has.
	Note that this diff output doesn't have its
	lines prefixed with '#'. This diff will not be a part
	of the commit message. See the `commit.verbose` configuration
	variable in linkgit:git-config[1].
+
If specified twice, show in addition the unified diff between
what would be committed and the worktree files, i.e. the unstaged
changes to tracked files.

-q::
--quiet::
	Suppress commit summary message.

--dry-run::
	Do not create a commit, but show a list of paths that are
	to be committed, paths with local changes that will be left
	uncommitted and paths that are untracked.

--status::
	Include the output of linkgit:git-status[1] in the commit
	message template when using an editor to prepare the commit
	message.  Defaults to on, but can be used to override
	configuration variable commit.status.

--no-status::
	Do not include the output of linkgit:git-status[1] in the
	commit message template when using an editor to prepare the
	default commit message.

-S[<keyid>]::
--gpg-sign[=<keyid>]::
--no-gpg-sign::
	GPG-sign commits. The `keyid` argument is optional and
	defaults to the committer identity; if specified, it must be
	stuck to the option without a space. `--no-gpg-sign` is useful to
	countermand both `commit.gpgSign` configuration variable, and
	earlier `--gpg-sign`.

\--::
	Do not interpret any more arguments as options.

<pathspec>...::
	When pathspec is given on the command line, commit the contents of
	the files that match the pathspec without recording the changes
	already added to the index. The contents of these files are also
	staged for the next commit on top of what have been staged before.
+
For more details, see the 'pathspec' entry in linkgit:gitglossary[7].

EXAMPLES
--------
When recording your own work, the contents of modified files in
your working tree are temporarily stored to a staging area
called the "index" with 'git add'.  A file can be
reverted back, only in the index but not in the working tree,
to that of the last commit with `git restore --staged <file>`,
which effectively reverts 'git add' and prevents the changes to
this file from participating in the next commit.  After building
the state to be committed incrementally with these commands,
`git commit` (without any pathname parameter) is used to record what
has been staged so far.  This is the most basic form of the
command.  An example:

------------
$ edit hello.c
$ git rm goodbye.c
$ git add hello.c
$ git commit
------------

Instead of staging files after each individual change, you can
tell `git commit` to notice the changes to the files whose
contents are tracked in
your working tree and do corresponding `git add` and `git rm`
for you.  That is, this example does the same as the earlier
example if there is no other change in your working tree:

------------
$ edit hello.c
$ rm goodbye.c
$ git commit -a
------------

The command `git commit -a` first looks at your working tree,
notices that you have modified hello.c and removed goodbye.c,
and performs necessary `git add` and `git rm` for you.

After staging changes to many files, you can alter the order the
changes are recorded in, by giving pathnames to `git commit`.
When pathnames are given, the command makes a commit that
only records the changes made to the named paths:

------------
$ edit hello.c hello.h
$ git add hello.c hello.h
$ edit Makefile
$ git commit Makefile
------------

This makes a commit that records the modification to `Makefile`.
The changes staged for `hello.c` and `hello.h` are not included
in the resulting commit.  However, their changes are not lost --
they are still staged and merely held back.  After the above
sequence, if you do:

------------
$ git commit
------------

this second commit would record the changes to `hello.c` and
`hello.h` as expected.

After a merge (initiated by 'git merge' or 'git pull') stops
because of conflicts, cleanly merged
paths are already staged to be committed for you, and paths that
conflicted are left in unmerged state.  You would have to first
check which paths are conflicting with 'git status'
and after fixing them manually in your working tree, you would
stage the result as usual with 'git add':

------------
$ git status | grep unmerged
unmerged: hello.c
$ edit hello.c
$ git add hello.c
------------

After resolving conflicts and staging the result, `git ls-files -u`
would stop mentioning the conflicted path.  When you are done,
run `git commit` to finally record the merge:

------------
$ git commit
------------

As with the case to record your own changes, you can use `-a`
option to save typing.  One difference is that during a merge
resolution, you cannot use `git commit` with pathnames to
alter the order the changes are committed, because the merge
should be recorded as a single commit.  In fact, the command
refuses to run when given pathnames (but see `-i` option).

COMMIT INFORMATION
------------------

Author and committer information is taken from the following environment
variables, if set:

GIT_AUTHOR_NAME
	GIT_AUTHOR_EMAIL
	GIT_AUTHOR_DATE
	GIT_COMMITTER_NAME
	GIT_COMMITTER_EMAIL
	GIT_COMMITTER_DATE

(nb "<", ">" and "\n"s are stripped)

The author and committer names are by convention some form of a personal name
(that is, the name by which other humans refer to you), although Git does not
enforce or require any particular form. Arbitrary Unicode may be used, subject
to the constraints listed above. This name has no effect on authentication; for
that, see the `credential.username` variable in linkgit:git-config[1].

In case (some of) these environment variables are not set, the information
is taken from the configuration items `user.name` and `user.email`, or, if not
present, the environment variable EMAIL, or, if that is not set,
system user name and the hostname used for outgoing mail (taken
from `/etc/mailname` and falling back to the fully qualified hostname when
that file does not exist).

The `author.name` and `committer.name` and their corresponding email options
override `user.name` and `user.email` if set and are overridden themselves by
the environment variables.

The typical usage is to set just the `user.name` and `user.email` variables;
the other options are provided for more complex use cases.

:git-commit: 1
include::date-formats.txt[]

DISCUSSION
----------

Though not required, it's a good idea to begin the commit message
with a single short (no more than 50 characters) line summarizing the
change, followed by a blank line and then a more thorough description.
The text up to the first blank line in a commit message is treated
as the commit title, and that title is used throughout Git.
For example, linkgit:git-format-patch[1] turns a commit into email, and it uses
the title on the Subject line and the rest of the commit in the body.

include::i18n.txt[]

ENVIRONMENT AND CONFIGURATION VARIABLES
---------------------------------------
The editor used to edit the commit log message will be chosen from the
`GIT_EDITOR` environment variable, the core.editor configuration variable, the
`VISUAL` environment variable, or the `EDITOR` environment variable (in that
order).  See linkgit:git-var[1] for details.

include::includes/cmd-config-section-rest.txt[]

include::config/commit.txt[]

HOOKS
-----
This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`,
`post-commit` and `post-rewrite` hooks.  See linkgit:githooks[5] for more
information.

FILES
-----

`$GIT_DIR/COMMIT_EDITMSG`::
	This file contains the commit message of a commit in progress.
	If `git commit` exits due to an error before creating a commit,
	any commit message that has been provided by the user (e.g., in
	an editor session) will be available in this file, but will be
	overwritten by the next invocation of `git commit`.

SEE ALSO
--------
linkgit:git-add[1],
linkgit:git-rm[1],
linkgit:git-mv[1],
linkgit:git-merge[1],
linkgit:git-commit-tree[1]

GIT
---
Part of the linkgit:git[1] suite

cmd: